Project case study · Danbury, TX

A 4-Foot Galvanized Chain Link Fence with Double Swing Gate for Danal Brown in Danbury, TX

Danal wanted a secure, low-maintenance fence that still let him keep an eye on the yard, plus a gate wide enough for his truck. Here is the 4-foot galvanized chain-link fence and double swing gate Mustang built him, and why a double gate like this needs bigger posts than the rest of the fence.

  • Reviewed Nov 2, 2026
  • Source: CLFMI Sec. 32 31 13
  • 3 job photos
Chain link fence and gate across a residential driveway
The double swing gate across Danal’s driveway, wide enough for truck and equipment access.
The short answer

Mustang Fencing installed a 4-foot galvanized chain-link fence with a double swing gate for Danal Brown in Danbury, TX: a gate sized for truck and equipment access, reinforced hinges and a sturdy latch system, and posts set deep for stability. This job sits outside the Galveston program’s service-area allowlist (Danbury is in Brazoria County), so no local ordinance is cited here — the facts below are general, sourced fence and gate-hardware information.

4 ftFence height
Double swing gateSized for truck/equipment access
Bigger footingGate posts need a larger footing than line posts (CLFMI)
Danbury, TXOutside the Galveston program’s service-area allowlist

Sources: Chain Link Fence Manufacturers Institute (CLFMI), Sec. 32 31 13; American Galvanizers Association. Checked November 2, 2026. This job sits outside the Galveston program’s service-area allowlist, so no city or county ordinance is cited for it.

The job: a 4-foot galvanized chain-link fence with a double swing gate

Danal Brown wanted a fence that would secure his Danbury property without blocking his view of the yard, plus a gate wide enough for easy vehicle and equipment access. Mustang Fencing installed a 4-foot galvanized chain-link fence with posts set deep for stability, and built a double swing gate sized for Danal’s truck.

The gate uses reinforced hinges and a sturdy latch system chosen to hold up under regular use. Galvanized steel resists rust and corrosion better than bare steel in humid conditions, which is part of why it was the material picked for this job.

A labeled diagram of a 4-foot galvanized chain-link fence line with posts set deep for stability, next to a double swing gate with two leaves, reinforced hinges and a sturdy latch, sized for truck and equipment access. The documented job: a 4-foot galvanized chain-link fence with a double swing gate THE FENCE LINE4 ft galvanized chain link Posts set deep for stability Low, open-view fencing THE DOUBLE SWING GATEsized for truck/equipment access Reinforced hinges, sturdy latch Two leaves swing open for wide access Based on the published job facts (post content + photos), not an external source.
S-1
DrawingThe documented job: a 4-foot galvanized chain-link fence with a double swing gate
BasisPublished job facts (post content + photos)
ScaleNot to scale
The build Danal specified: an open-view chain-link fence line and a wide double swing gate for vehicle access.
Chain link fence and gates along a residential driveway
The chain-link fence and gates along the driveway — the same job documented in the hero photo.

Why a double swing gate needs bigger posts

A double swing gate puts more load on its two end posts than a straight run of fence does — each post has to carry a swinging gate leaf, not just hold the fence line taut. The Chain Link Fence Manufacturers Institute’s commercial/industrial fence guide calls for gate posts to be set in a larger footing than ordinary line posts, sized to the post’s own diameter, and for double gates to have leaf holdbacks installed — a separate piece of hardware from the latch that holds each open leaf in place so it can’t swing shut (or further open) in the wind.

Two panels. Left: gate posts need a larger footing than a line post because they carry the gate leaf’s weight, per CLFMI Sec. 3.2(A) and ASTM F567. Right: leaf holdbacks hold each open gate leaf so it cannot swing shut in the wind, per CLFMI Sec. 3.5(A). A note states holdbacks are required on all double gates, separate from the latch. Why a double swing gate needs bigger posts and leaf holdbacks GATE POSTS Larger footing than a line post —it carries the gate leaf’s weight CLFMI Sec. 32 31 13, Sec. 3.2(A)/ASTM F567 LEAF HOLDBACKS Hold each open leaf so itcan’t swing shut in the wind CLFMI Sec. 32 31 13, Sec. 3.5(A) Required on all double gates, separate from the latch — the latch secures the gate closed, holdbacks secure it open.
S-2
DrawingWhy a double swing gate needs bigger posts and leaf holdbacks
BasisChain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial Chain Link Fence, Sec. 32 31 13, Sec. 3.2(A)/3.5(A); ASTM F567
ScaleNot to scale
Gate posts carry more load than line posts, and an open double gate needs its own hardware to stay open.

Gate post footing size checker

Plain arithmetic from the CLFMI formula for chain-link gate/terminal post footings — not a measurement of this job’s own posts, and not a substitute for a site-specific engineering check (soil, frost depth and wind load can require more).

0IN. MIN. FOOTING DIAMETER

Footing diameter = 4× post OD up to 4 in. OD, 3× OD above that. Footing depth = 24 in. + 3 in. per foot of fence height over 4 ft. Per CLFMI Sec. 32 31 13, Sec. 3.2(A) / ASTM F567. Gate posts need at least this; site conditions can require more.

Chain link fence along the front yard and driveway of a single-story house
The chain-link fence along the front yard and driveway.
★★★★★
chainlink fence installation by mustang fencing, looks really great, thanks.
karina hernandez · Google review · a year ago
★★★★★
Mustang’s team installed iron fence for me and did an absolutely incredible job! I would recommend this company to anyone I know!
Theodore Howitt · Google review · a year ago
★★★★★
I am so pleased with the fence!! Your solution was exactly the right one and the team did a highly professional job. Frankly, I was amazed at how clean the job site was at the completion of the project. Feel free to list me as a reference and a very happy customer. Thanks again and please let the men know That I appreciate their hard work and quality craftsmanship.
Anees Abbas Bawa · Google review · 2 years ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-02.

Questions we get about this

What did Mustang Fencing build for Danal Brown?
A 4-foot galvanized chain-link fence with a double swing gate in Danbury, TX. The gate is sized for truck and equipment access, with reinforced hinges and a sturdy latch system, and the fence posts were set deep for stability.
Why does a double swing gate need bigger posts than the rest of the fence?
Each gate post carries a swinging gate leaf, not just a taut fence line. CLFMI’s commercial chain-link guide calls for gate posts to sit in a larger footing than ordinary line posts, sized to the post’s own diameter.
What keeps a double gate’s open leaves from swinging in the wind?
A leaf holdback — separate hardware from the latch — holds each open leaf in place. CLFMI requires holdbacks on all double gates.
Why use galvanized steel for a chain-link fence?
Galvanized (zinc-coated) steel resists rust and corrosion better than bare steel, which matters in a humid climate. It needs little upkeep beyond an occasional check.
Does Mustang Fencing serve Danbury, TX?
This project was completed in Danbury, which sits outside the Galveston-area service region this site otherwise focuses on. See every area we serve for current coverage.

Sources

Checked November 2, 2026. Rules change, so confirm with the City before you build.

  1. Chain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial Chain Link Fence, Sec. 32 31 13 — Sec. 2.9: gate hinges and latch hardware. Sec. 3.2(A): gate posts require larger footings than line posts, per ASTM F567. Sec. 3.5(A): leaf holdbacks required on all double gates.
  2. American Galvanizers Association, “Performance of Galvanized Steel in Different Environments” (2012) — Explains how a galvanized coating resists corrosion across different exposure environments compared to bare steel.
Free on-site estimate

Need a wide gate for vehicle or equipment access?

We’ll size the posts and gate hardware to the load before any order goes on a written estimate.

Page reviewed November 2, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.