Project case study · Galveston, TX

Crafting a 93-Foot Custom Fence and 9.5-Foot Gate for Dan Nutter in Galveston, TX

Dan needed a fence long enough to secure his Galveston property and a gate wide enough for vehicle access, built to hold up against coastal wind and salt air. Here is the 93-foot wood fence and 9.5-foot double gate Mustang built him, and why that opening splits into two leaves instead of one.

  • Reviewed Nov 3, 2026
  • Source: Jewett-Cameron Adjust-A-Gate specs
  • 3 job photos
Wood fence and gate beside a red brick wall
The new wood fence and 9.5-foot double gate beside the brick wall of Dan’s home.
The short answer

Mustang Fencing installed a 93-foot custom wood fence with a 9.5-foot double gate for Dan Nutter in Galveston, TX, sized for vehicle access. The wood was pressure-treated for coastal humidity and salt air, finished with a weather-resistant sealant, and the posts were set deep for stability against high wind. The gate’s 9.5-foot opening is built as two leaves, not one — the fact behind the sheet and calculator below.

93 ftTotal fence length
9.5 ftGate opening, built as two leaves
Pressure-treated woodWith a weather-resistant sealant
Galveston, TXPosts set deep for wind stability

Sources: Jewett-Cameron, Adjust-A-Gate installation instructions (AG36/AG60). Checked November 3, 2026.

The job: a 93-foot wood fence with a 9.5-foot gate

Dan Nutter wanted a custom fence long enough to secure his Galveston property and a gate wide enough for easy vehicle access, without sacrificing curb appeal. Mustang Fencing installed a 93-foot wood fence with a 9.5-foot gate, using pressure-treated wood to handle the area’s humidity and salt air.

The posts were set deep into the ground for extra stability against Galveston’s high winds, and a weather-resistant sealant was applied to help the fence resist warping, rotting and discoloration over time. The gate was reinforced with sturdy posts and durable hardware, and built as two leaves, each with its own diagonal brace.

A labeled diagram of a 93-foot pressure-treated wood fence line with a weather-resistant sealant and deep-set posts, next to a double gate with two braced leaves reinforced with durable hardware, totaling a 9.5-foot opening sized for vehicle access. The documented job: a 93-foot wood fence with a 9.5-foot double gate THE FENCE LINE93 ft, pressure-treated wood Weather-resistant sealant applied Posts set deep for wind stability THE DOUBLE GATE9.5 ft total opening, sized for vehicle access Reinforced with durable hardware Each leaf has a diagonal brace Based on the published job facts (post content + photos), not an external source.
S-1
DrawingThe documented job: a 93-foot wood fence with a 9.5-foot double gate
BasisPublished job facts (post content + photos)
ScaleNot to scale
The build Dan specified: a long, sealed fence line and a wide, braced double gate for vehicle access.
Wood privacy fence along a narrow side passage
The 93-foot wood fence line along the side of Dan’s property.

Why the 9.5-foot opening is two leaves, not one

Dan’s gate needed to be wide enough for vehicle access — 9.5 feet, or 114 inches, in total. Rather than building that as one very wide leaf, Mustang split it into a double gate, two leaves hinged on opposite posts. Published kit specifications for adjustable gate frames show why that split makes sense: with roughly a 1-inch gap left between the two leaves, each leaf on a 114-inch opening comes out to about 56.5 inches wide — a width that falls inside the standard kit range built for a single leaf, instead of needing an oversized one-leaf gate.

Two panels. Left: one 114-inch gate opening, the total width specified for Dan’s job. Right: that opening split into two leaves of about 56.5 inches each, which fits the standard AG36 double-gate frame kit range of 30 to 60 inches per leaf, with a 1-inch gap between the leaves. Why a 9.5-foot gate opening becomes two leaves, not one ONE 114 IN. OPENING 9.5 ft (114 in.) total gate width As specified for Dan’s job TWO ~56.5 IN. LEAVES Each leaf fits the standard AG36 kit range (30 in. to 60 in. per leaf), 1 in. gap between leaves Splitting a wide opening into two leaves keeps each leaf inside a standard double-gate kit’s range, instead of needing one oversized leaf.
S-2
DrawingWhy a 9.5-foot gate opening becomes two leaves, not one
BasisJewett-Cameron, Adjust-A-Gate installation instructions for adjustable gate frames (AG36/AG60): opening ranges 30-60 in. and 60-96 in.; suggested 1 in. gap between double-gate leaves
ScaleNot to scale
A 114-inch opening splits evenly into two leaves that each fit a standard gate-frame kit range.

Double-gate leaf width calculator

Arithmetic from Jewett-Cameron’s published Adjust-A-Gate kit ranges for a double gate — not a measurement of Dan’s own gate, and not a substitute for a site-specific check by your installer.

0IN. PER LEAF

Per-leaf width = (total opening − 1 in. double-gate gap) ÷ 2. AG36 kit range: 30 in. to 60 in. per leaf. AG60 kit range: 60 in. to 96 in. per leaf. Per Jewett-Cameron, Adjust-A-Gate installation instructions (AG36/AG60; suggested 1 in. gap between double-gate leaves).

New wood fence panel meeting older fencing beside a red house
The new fence panel meeting the existing fence line beside the house.
★★★★★
Excellent work. They came in handy after the hurricane hit our backyard. Friendly people too.
Donez · Google review · a year ago
★★★★★
True professionalism is very rare in this day and age, these guys live upto their word and deliver on their service! Our fence was down in the July storm and these guys came and gave a reasonable quote, after confirming I received a time line and they delivered! Will recommend them to everyone I know who needs fencing done.
Adam Evans · Google review · a year ago
★★★★★
Seems to have helped out a after hurricane beryl we all appreciate it thank you!
Joseph Babaian · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-02.

Questions we get about this

What did Mustang Fencing build for Dan Nutter?
A 93-foot custom wood fence with a 9.5-foot double gate in Galveston, TX, sized for vehicle access. The wood was pressure-treated with a weather-resistant sealant, and the posts were set deep for wind stability.
Why is the 9.5-foot gate built as two leaves instead of one?
With a 1-inch gap between leaves, a 9.5-foot (114-inch) opening splits into two leaves of about 56.5 inches each — a width that fits a standard adjustable gate-frame kit range (30 to 60 inches per leaf), per Jewett-Cameron’s published Adjust-A-Gate specifications.
Why use pressure-treated wood for a Galveston fence?
Pressure treatment helps wood resist the decay that humidity and salt air can cause along the coast, which is part of why it was used for this fence.
What does the sealant do?
A weather-resistant sealant was applied to help the fence resist warping, rotting and discoloration over time.
Does Mustang Fencing serve Galveston, TX?
Yes. See fence and gate installation on Galveston Island for the area we serve there.

Sources

Checked November 3, 2026. Rules change, so confirm with the City before you build.

  1. Jewett-Cameron, Adjust-A-Gate installation instructions for adjustable gate frames (AG36 and AG60) — Opening ranges 30-60 in. (AG36) and 60-96 in. (AG60); used here to size each leaf of Dan’s 114-inch double-gate opening.
  2. Jewett-Cameron, Adjust-A-Gate AG72LTP adjustable gate frame assembly instructions — States a suggested 1-inch gap between double-gate leaves, used here to size the per-leaf width.
Free on-site estimate

Need a wide gate built for vehicle access?

We’ll work out whether your opening needs a single leaf or a double gate before any order goes on a written estimate.

Page reviewed November 3, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.

1 thought on “Crafting a 93-Foot Custom Fence and 9.5-Foot Gate for Dan Nutter in Galveston, TX”

  1. Pingback: Commercial Gate Fire Access Rules in Galveston, TX

Comments are closed.