Project case study · Galveston, TX

A Wood Privacy Fence on Galvanized Steel Posts for Raj Bher in Galveston, TX

Raj wanted a custom wood privacy fence for his Galveston property. Here is what the project photos actually show Mustang built him — vertical board panels on galvanized steel line posts — and what that zinc coating on the posts is doing.

  • Reviewed Nov 3, 2026
  • Source: American Galvanizers Association
  • 2 job photos
Wood privacy fence supported on galvanised steel posts
The wood privacy fence panels on galvanized steel line posts Mustang built for Raj.
The short answer

Mustang Fencing Services built a custom wood privacy fence for Raj Bher in Galveston, TX. The project’s own photos show vertical board panels mounted on galvanized steel line posts, with a cap rail along the top and a mid rail — not the cedar-on-concrete build described in an earlier version of this page, which did not match the photos on file.

Vertical board panelsFence style, per the photos
Galvanized steel postsLine posts, per the photos
Cap + mid railFraming, per the photos
Galveston, TXCustom wood privacy fence

Sources: this project’s own photos; American Galvanizers Association, “ASTM A123 and G90 Specifications”. Checked November 3, 2026.

The job: a wood privacy fence on galvanized steel line posts

Raj Bher wanted a custom wood privacy fence for his Galveston property. Mustang Fencing Services built it with vertical board panels on galvanized steel line posts, finished with a cap rail along the top and a mid rail partway down — the framing visible in the project’s own photos. The fence line backs onto visible utility infrastructure (transmission towers and storage tanks in the distance), which the photos also show.

Two panels, both photographed. Left, a galvanized steel pipe line post with bracket hardware holding a wood panel, no concrete or wood post visible. Right, the fence line with vertical board panels, a cap rail and a mid rail, with utility and tank infrastructure visible beyond the line. What these photos document: wood panels on galvanized steel line posts THE POST + BRACKETgalvanized steel pipe No concrete or wood posts visible THE FENCE LINEvertical boards, cap + mid rail Utility/tank infrastructure beyond the line From this project’s own photos (2819, 2820). Not an external source.
S-1
DrawingWhat these photos document: wood panels on galvanized steel line posts
BasisPhotos 2819 and 2820 attached to this project post
ScaleNot to scale
What the photos on file actually show: galvanized steel line posts, vertical board panels, a cap rail and a mid rail.
Wood privacy fence with industrial storage tanks and transmission towers beyond
The fence line, with utility and tank infrastructure visible beyond the property line.

What the zinc coating on the posts is doing

Fence line posts are often fabricated steel tube or pipe rather than wood, and they are commonly hot-dip galvanized for corrosion protection — which matches what this project’s photos show. There are two different ways a steel post can pick up its zinc coating, and they are not the same thickness. ASTM A123 covers batch hot-dip galvanizing, where the post is fabricated (cut, welded, drilled) and then dipped whole into molten zinc, producing a thicker, metallurgically bonded coating. ASTM A653 class G90 covers continuous-process sheet galvanizing, applied to flat steel sheet before it is formed, at roughly 0.76 mil of zinc per side — thinner, and on a different base product.

Two posts compared. Left, ASTM A123 batch hot-dip: fabricated then dipped in molten zinc, a thicker metallurgically bonded coating. Right, ASTM A653 class G90 sheet: a continuous-process coating applied before forming, about 0.76 mil per side. A note explains a fence post is usually fabricated tube, hot-dip galvanized after fabrication under A123, a thicker coating than sheet steel’s G90 class. Two ways a steel fence post gets its zinc coating ASTM A123: BATCH HOT-DIP Fabricated, then dipped in molten zinc Thicker, metallurgically bonded coating ASTM A653 CLASS G90: SHEET Continuous-process sheet, coated before forming — about 0.76 mil/side A post is usually fabricated tube, hot-dip galvanized after welding/cutting (ASTM A123) — a thicker coating than sheet-steel’s G90 class.
S-2
DrawingTwo ways a steel fence post gets its zinc coating
BasisAmerican Galvanizers Association, “ASTM A123 and G90 Specifications”
ScaleNot to scale
A123 batch hot-dip coats a finished post; G90 coats the flat sheet before it is even formed. Different processes, different thickness.
Elevation drawing of a generic wood privacy fence on three steel line posts, with a cap rail near the top and a mid rail partway down, vertical boards filling each bay. Labels point to the line posts, cap rail and mid rail. Parts of a wood privacy fence on steel line posts line postline postline post cap railmid rail General framing terms, drawn to match the kind of fence in these photos. Not a measurement of this project.
S-3
DrawingParts of a wood privacy fence on steel line posts
BasisGeneral wood-fence-on-steel-post framing, drawn to match the kind of fence in these photos. Not a measurement of this project
ScaleNot to scale
The parts to ask about on a quote for this style: line posts, cap rail, mid rail and the board panels between them.

Zinc coating weight to thickness estimator

Converts a continuous-sheet galvanizing coating weight (oz per sq ft, total both sides) to an approximate thickness per side, using the documented ASTM A653 class G90 ratio as the scaling reference. Coating weight scales linearly with thickness because it is the same zinc layer measured two ways.

Reference point: ASTM A653 class G90 = 0.9 oz/ft² total (0.45 oz/ft² per side) = about 0.76 mil per side. Other weights are scaled from that ratio. Batch hot-dip coatings on fabricated steel (ASTM A123), such as the line posts in this project, are a different, generally thicker process and are not rated by this oz/ft² sheet scale. Source: American Galvanizers Association, “ASTM A123 and G90 Specifications”.

★★★★★
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
Muqeet Mohammed Abdul · Google review · a year ago
★★★★★
Installed Stained cedar wood fence yesterday by mustang fencing, thanks for the beautiful work.
Shahrukh Abdul · Google review · a year ago
★★★★★
I have hired Mustang fencing services to fix my backyard fencing. Good wood to used. I really like theirs work. Best of luck
Zaidbin Saif · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-02.

Questions we get about this

What did Mustang Fencing Services build for Raj Bher?
A custom wood privacy fence in Galveston, TX, with vertical board panels mounted on galvanized steel line posts, a cap rail along the top and a mid rail — the build shown in the project’s own photos.
Why does an earlier version of this page describe a different fence?
An earlier version described cedar posts set in concrete with horizontal panels. That did not match this project’s photos on file, which show vertical boards on galvanized steel posts with no concrete visible, so this page was corrected to the photographed build.
What is the difference between ASTM A123 and G90 galvanizing?
A123 is batch hot-dip galvanizing applied to a post after it is fabricated, producing a thicker, metallurgically bonded coating. G90 is a continuous-process sheet-steel coating class (ASTM A653) applied before forming, at about 0.76 mil of zinc per side — a thinner coating on a different base product.
What are the cap rail and mid rail on a wood privacy fence?
Standard framing points on a wood privacy fence panel: a cap rail runs along the top and a mid rail partway down, with the boards fastened to both. Ask to see them on your own quote.
Does Mustang Fencing Services serve Galveston, TX?

Sources

Checked November 3, 2026. Rules change, so confirm with the City before you build.

  1. American Galvanizers Association, “ASTM A123 and G90 Specifications” — Batch hot-dip (ASTM A123) vs. continuous-process sheet galvanizing (ASTM A653 class G90) comparison, including the 0.9 oz/ft² total ≈ 0.76 mil/side reference ratio used in the sheet and tool above.
Free on-site estimate

Want a wood fence on steel line posts?

We’ll show you the post and panel hardware before any order goes on a written estimate.

Page reviewed November 3, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.