Project case study · Galveston, TX

A Pine Privacy Fence with Dog-Ear Pickets for Paul Winfield in Galveston, TX

Paul wanted privacy along a narrow side yard. Here is the pressure-treated pine fence Mustang built him — posts and rails set to a string line first, dog-ear pickets attached last — and why a cut picket top still needs its end grain sealed.

  • Reviewed Nov 3, 2026
  • Source: USDA FPL Wood Handbook
  • 3 job photos
Pine privacy fence with dog-ear pickets, seen from the rail side along a narrow side yard
The finished dog-ear pine fence along Paul’s narrow side yard, seen from the rail side.
The short answer

Mustang Fencing Services built a pressure-treated pine privacy fence with dog-ear pickets for Paul Winfield along a narrow side yard in Galveston, TX. The project’s own photos show the build order: posts and rails were set first to a string line for a straight run, and the dog-ear pickets were attached last. A weather-resistant stain was discussed for the coastal climate.

Pine, dog-ear picketsFence style
Narrow side yardWhere it was built
Posts/rails firstPickets attached last
Galveston, TXPressure-treated wood

Sources: this project’s own photos; USDA Forest Products Laboratory, Wood Handbook FPL-GTR-282 (2021), Ch. 16. Checked November 3, 2026.

The job: a pine privacy fence along a narrow side yard

Paul Winfield wanted a wooden fence that would add privacy along a narrow side yard on his Galveston property, next to an existing chain-link property-line fence. Mustang Fencing Services built a pressure-treated pine privacy fence with dog-ear pickets, and discussed a weather-resistant stain to help the wood hold up to Galveston’s salty air and sun.

The project’s own photos show how it went up: posts and rails were set first, run to a string line to keep the fence straight along the narrow strip, with picket stock staged alongside until the framing was ready. The dog-ear pickets went on last.

Two panels, both photographed. Left, posts and rails already set along a string line, with picket stock staged alongside, not yet attached. Right, the finished dog-ear picket pine fence along the narrow side yard, seen from the rail side. What these photos document: posts and rails first, dog-ear pickets last STEP 1: POSTS + RAILSset to a string line Picket stock staged alongside not yet attached STEP 2: DOG-EAR PICKETSpine, attached last Rail side, narrow side yard From this project’s own photos (posts/rails set to a string line, pickets staged, then attached). Not an external source.
S-1
DrawingWhat these photos document: posts and rails first, dog-ear pickets last
BasisPhotos 2799, 2800 and 2801 attached to this project post
ScaleNot to scale
The build order this project’s own photos show: posts and rails to a string line, pickets attached last.
Pressure-treated posts and rails set to a string line, with picket stock staged against the old chain-link fence
Posts and rails set to a string line, with picket stock staged against the old chain-link fence before the dog-ear pickets went up.

Why a cut picket top still needs sealing

A dog-ear cut trims the two square corners off the top of a picket into a single angled edge. It is a cosmetic and practical shape, but the cut itself exposes end grain — the same kind of grain exposed at any sawn end of a board, square or angled. USDA’s Forest Products Laboratory, in its finishing guidance for exterior wood, is direct about it: always seal all end grain. That applies whether the picket top is left square or cut to a dog-ear point.

Two picket tops compared. Left, a square-cut top with two exposed corners circled, labeled end grain exposed at the top of every picket. Right, this fence’s dog-ear cut, one angled edge, also circled, labeled still end grain, still needs sealing. A note quotes the USDA FPL Wood Handbook guidance to always seal all end grain. The cut top of a dog-ear picket is end grain SQUARE-CUT TOP Two squared corners expose end grain at the top of every picket DOG-EAR CUT (this fence) One angled cut, one exposed edge still end grain — still needs sealing USDA FPL Wood Handbook (2021), Ch. 16: “…always seal all end grain.” A cut picket top is end grain either way the corner is finished.
S-2
DrawingThe cut top of a dog-ear picket is end grain
BasisUSDA Forest Products Laboratory, Wood Handbook FPL-GTR-282 (2021), Ch. 16
ScaleNot to scale
Square or dog-ear, a cut picket top is end grain — the detail the finishing guidance says to seal.

Picket-run calculator

A straight-arithmetic estimate of how many pickets a fence run needs, based on the run length and the picket width you plan to use. Not a quote — corners, gates and waste cuts are not included.

Arithmetic: run length (in) divided by (picket width + gap). A privacy-style dog-ear fence is typically installed with a 0-inch gap (pickets butted edge to edge); a spaced picket fence uses a gap. Rounded up to the nearest whole picket.

Crew measuring along the string line while setting posts and rails for the side-yard fence
Setting posts and rails along the string line before the pickets went up.
★★★★★
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
Muqeet Mohammed Abdul · Google review · a year ago
★★★★★
Installed Stained cedar wood fence yesterday by mustang fencing, thanks for the beautiful work.
Shahrukh Abdul · Google review · a year ago
★★★★★
Excellent work. They came in handy after the hurricane hit our backyard. Friendly people too.
Donez · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-02.

Questions we get about this

What did Mustang Fencing Services build for Paul Winfield?
A pressure-treated pine privacy fence with dog-ear pickets along a narrow side yard in Galveston, TX, next to an existing chain-link property-line fence.
What order was it built in?
Posts and rails were set first, run to a string line to keep the fence straight along the narrow side yard. The dog-ear pickets were attached last.
Does a dog-ear picket top need anything special?
The cut top is end grain, whether it is left square or cut to a dog-ear point. USDA’s Forest Products Laboratory finishing guidance says to always seal all end grain on exterior wood.
Why pressure-treated pine?
It is a durable, cost-effective choice for exterior fencing; a weather-resistant stain was discussed to help it hold up to Galveston’s salty air and sun.
Does Mustang Fencing Services serve Galveston, TX?

Sources

Checked November 3, 2026. Rules change, so confirm with the City before you build.

  1. USDA Forest Products Laboratory, Wood Handbook FPL-GTR-282 (2021), Ch. 16 — Finishing guidance for exterior wood, including the instruction to always seal all end grain, used here for the dog-ear picket-top detail visible in this project’s photos.
Free on-site estimate

Want a privacy fence for a tricky side yard?

We’ll run a string line and talk through picket style before any order goes on a written estimate.

Page reviewed November 3, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.