A Memorable Wooden Fence Project in Galveston, Texas
A new wood privacy fence with dog-ear picket tops, photographed from both sides at a Galveston home. Here is what the three project photos show, how a privacy fence like this is put together, and what pressure treatment actually means for the boards and posts.

These photos document a new wood privacy fence at a Galveston home: solid vertical pickets with dog-ear tops, horizontal rails and a board along the bottom. Two photos show the picket side and one shows the rail side with its posts. The page doesn’t state a wood species, height, length, date or price, because none of them can be read from the photos. What it adds is general, sourced wood-fence information that applies to a fence like this.
Sources: Southern Forest Products Association, Pressure-Treated Southern Pine (2019 ed.), Table 3-1; Texas Utilities Code Ch. 251; Texas811 homeowner pages. Checked October 24, 2026.
What the photos show
All three photos show the finished fence, a light-colored wood privacy fence with dog-ear tops on the pickets. In the hero photo the picket side runs along a bed of shrubs and a potted plant, with a horizontal rail visible above a post and a board low on the fence. A second photo looks at the back of the fence, where the posts, the horizontal rails and the lower board are visible. The third follows the picket side along a mulched bed with a potted palm.
The wood species and the height are not stated here, because they can’t be read from the photos. To compare materials, see wood fence installation and cedar vs. pressure-treated pine.

What “pressure-treated” actually means
A wood fence’s decay resistance comes mostly from the AWPA use category the lumber was pressure-treated to, not from appearance. The Southern Forest Products Association’s tables set a UC3A (coated) or UC3B (uncoated) minimum for exposed, above-ground fence boards and rails, and a higher UC4A minimum for posts in ground contact, which is a harsher decay exposure.
A stain or sealer adds a surface layer against moisture and sun on top of that treatment. It is a maintenance layer, not a substitute. Ask any builder which category each part is treated to, and get it in writing on the quote.
Wood privacy fence board & post estimator
This project’s footage wasn’t published, so enter your own run to see about how many boards and posts a solid privacy fence like this takes. It’s arithmetic, not a manufacturer spec.
Board count: linear feet × 12 ÷ board width, rounded up (edge to edge, no gap). Post count: one post per spacing interval, plus one. All arithmetic, not a manufacturer figure and not this project’s measured footage.

Planning a wood privacy fence
- Comparing materials? See wood fence installation and cedar vs. pressure-treated pine.
- Digging new post holes? See calling 811 before a fence goes in.
- In Galveston? See fence and gate installation on Galveston Island or every area we serve.
What customers say on Google
5.091 Google reviews · read them all on Google
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
I have hired Mustang fencing services to fix my backyard fencing. Good wood to used. I really like theirs work. Best of luck
Excellent work. They came in handy after the hurricane hit our backyard. Friendly people too.
Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-10-26.
Questions we get about this
What do the photos on this project page show?
What wood is this fence built from?
Does stain or sealer replace pressure treatment?
Do new fence post holes need an 811 call?
Does Mustang Fencing build wood fences in Galveston?
Sources
Checked October 27, 2026. Rules change, so confirm with the City before you build.
- Southern Forest Products Association, Pressure-Treated Southern Pine (2019 ed.) — Table 3-1, AWPA use categories: UC3A/UC3B for above-ground fence boards and rails vs. UC4A for posts in ground contact.
- Texas811, Homeowner / DIYer — Statewide one-call requirement: notify 811 at least 48 hours before digging, including new fence post holes.
- Texas Utilities Code, Chapter 251 (Underground Facility Damage Prevention) — 48-hour minimum, 14-day maximum advance notice before excavation (251.151); civil penalty for noncompliance (251.201).
Planning a wood privacy fence?
We’ll talk through material and treatment options and give you a written estimate. Free on-site estimates in Galveston.