Project case study · Manvel, TX

A New Fence Tie-In for Karla Woodroof in Manvel, TX

Karla Woodroof needed a new section of fence tied into her existing run for added stability and security. Mustang built a ~13-foot dog-ear picket run and joined it to her ~18-foot existing fence. Here’s what the project photos document — including a material correction — plus why fresh pine looks pale before staining, with a picket estimator below.

  • Reviewed Nov 9, 2026
  • Source: Southern Forest Products Association
  • 6 job photos
New pine dog-ear fence section joined to a weathered existing fence beside a trampoline
Where Karla Woodroof’s new fence run (right) ties into her existing weathered fence (left).
The short answer

Mustang Fencing built a new ~13-foot dog-ear picket fence run for Karla Woodroof in Manvel, TX, and tied it into her existing ~18-foot fence for added stability. The project’s own photos show pine, not the cedar an earlier version of this page claimed — corrected here.

~13 ftNew dog-ear fence run, tied into the existing fence
~18 ftKarla’s existing fence run, kept in place
Dog-ear pineNew-run picket style and material, documented in project photos
Manvel, TXKarla Woodroof’s property

Sources: this project’s own documented facts and photos; Southern Forest Products Association. Checked November 9, 2026.

The job: a new run, tied into the existing fence

Karla Woodroof needed a new section of fence built and tied into her existing fence line, both for added stability and to keep her property secure. Mustang built a new ~13-foot dog-ear picket run and joined it to her existing ~18-foot fence, which was left in place rather than replaced.

The project’s own photos show exactly that: the weathered existing run standing right next to the freshly built new section, joined at a single seam.

Diagram showing an existing, weathered ~18-foot fence run kept in place on the left, tied into a new ~13-foot dog-ear picket fence run on the right THE TIE-IN THIS PROJECT’S OWN PHOTOS DOCUMENT EXISTING FENCE (WEATHERED, KEPT) — ~18 FT EXISTING RUN — NOT REPLACED NEW TIE-IN — ~13 FT NEW DOG-EAR RUN, TIED IN
S-1
DrawingThe tie-in this project’s own photos document
BasisThis project’s own documented photos (media 6446, 6448)
ScaleNot to scale
Illustrative, based on this project’s own before/after photos — not a scale drawing of the yard.
Weathered wood privacy fence beside a standby generator
Karla Woodroof’s existing fence run, kept in place rather than replaced.
Weathered wood privacy fence with a new section beside a trampoline
The existing run meeting the new tie-in section, near the trampoline.

What the new section actually is

An earlier version of this page called this a “cedar fence project.” Checking every photo on file for this job against the Drive job-photo archive (owner-approved for use sitewide, 2026-11-04) shows a pale, straight-grained new run — not the reddish, tighter-grained look of cedar — and the archive’s own filename classification for these photos is “pine dog-ear.” That’s the material named on this page now; the cedar claim is dropped.

The new run is built in a dog-ear picket style: each picket’s top two corners are clipped at an angle instead of left square or cut to a point. It’s one of the most common residential privacy-fence profiles.

Two panels. Left: a row of dog-ear picket silhouettes with the top corners clipped at an angle. Right: text explaining that fresh pressure-treated pine looks pale and unstained at install, and that SFPA recommends waiting about 30 days before an oil-based semi-transparent stain or about 6 months before a solid-color stain, paint, or water-based stain on wet or not-redried treated wood. WHAT “DOG-EAR” MEANS, AND WHY NEW PINE LOOKS PALE AT FIRST DOG-EAR PICKET PROFILE TOP CORNERS CLIPPED AT AN ANGLE FRESH PINE, NOT YET STAINED Pale / unstained look at install SFPA: wait ~30 days before an oil-based semi-transparent stain, or ~6 months before a solid-color stain, paint, or water-based stain on wet / not-redried treated wood
S-2
DrawingWhat “dog-ear” means, and why new pine looks pale at first
BasisSouthern Forest Products Association (SFPA), Deck Finishing, Maintenance and Inspection; Pressure-Treated Southern Pine (2019 ed.)
ScaleNot to scale
General manufacturer/association guidance, not a guarantee of drying time for this specific yard’s conditions.
Wood privacy fence behind a garden trampoline
The finished tie-in fence enclosing the back yard, trampoline visible along the run.

Dog-ear picket count estimator

Straight linear-footage arithmetic, not a materials order — confirm exact counts with your installer. Default length (13 ft) matches this project’s documented new tie-in run. Default picket width (5.5 in) is the common actual width of a nominal 1×6 fence picket; change it if yours differs.

Picket count = (fence length in inches) ÷ (picket width + gap), rounded up. Doesn’t add extra for posts, corners or a gate opening — an estimate only, confirm with your installer.

★★★★★
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
Muqeet Mohammed Abdul · Google review · a year ago
★★★★★
Very professional and friendly. Gotten automatic gates done and they are done to perfection! Thank you
Tannia Cravinas · Google review · a year ago
★★★★★
I am so pleased with the fence!! Your solution was exactly the right one and the team did a highly professional job. Frankly, I was amazed at how clean the job site was at the completion of the project. Feel free to list me as a reference and a very happy customer. Thanks again and please let the men know That I appreciate their hard work and quality craftsmanship.
Anees Abbas Bawa · Google review · 2 years ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-08.

Questions we get about this

What did Mustang Fencing do for Karla Woodroof in Manvel?

Built a new ~13-foot dog-ear picket fence run and tied it into her existing ~18-foot fence, which was kept in place, for added stability and security.

What type of wood is the new fence section?

Pine, built in a dog-ear picket style. (An earlier version of this page said cedar; the job photos and the Drive archive’s own classification don’t support that, so it’s corrected here.)

What does “dog-ear” mean on a picket fence?

The top two corners of each picket are clipped at an angle instead of being left square or cut to a point. It’s one of the most common residential privacy-fence picket styles.

Why does the new section look pale instead of stained?

Fresh pressure-treated pine is pale and sometimes greenish at install. Per the Southern Forest Products Association, wet or not-redried treated wood should dry before finishing — roughly 30 days before an oil-based semi-transparent stain, or up to 6 months before a solid-color stain, paint, or water-based stain.

Does Mustang Fencing build wood fences elsewhere near Manvel?

Sources

Checked November 9, 2026. Rules change, so confirm with the City before you build.

  1. Southern Forest Products Association, Deck Finishing, Maintenance, and Inspection — Wait times before finishing wet-treated and not-redried Southern Pine; ~30 days for semi-transparent oil-based stain, ~6 months for solid-color stain/paint/water-based stain.
  2. Southern Forest Products Association, Pressure-Treated Southern Pine (2019 edition) — Moisture content before/after treatment; most treated pine delivered without redrying; finishing treated wood.
Free on-site estimate

Need a new fence section tied into your existing fence near Manvel?

We’ll look at your existing run and the new section together before any written estimate.

Page reviewed November 9, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.