Project case study · Galveston, TX

A Stellar Project Experience with Karen Patit in Galveston, TX

Karen’s aging fence needed to be replaced. Here is the documented scope Mustang completed — a 66-foot run on galvanized posts with 8-foot cedar pickets and a 2×12 top trim, a metal-frame gate, and a lock repair to her existing privacy kit — plus the sourced reason galvanized posts hold up on a Galveston property.

  • Reviewed Nov 4, 2026
  • Source: American Galvanizers Association
  • 3 job photos
Wood privacy fence at the corner of a planted garden
The corner of Karen’s new cedar privacy fence, Galveston.
The short answer

Mustang Fencing replaced Karen Patit’s aging fence in Galveston, TX with a 66-foot cedar privacy fence on galvanized posts, with 8-foot pickets and a 2×12 top trim, all secured with screws. The project also included a new metal-frame gate and a lock repair to Karen’s existing privacy kit.

66 ftFence run replaced
8 ftPicket height
2×12Top trim, screwed not nailed
−1.10 VZinc’s electrode potential in sea water (AGA)

Sources: this project’s own documented facts and photos; American Galvanizers Association, “Galvanized Steel with Aluminum Parts.” Checked November 4, 2026.

The job: a 66-ft fence replacement for an aging property line

Karen Patit’s existing fence in Galveston had reached the point of needing to be replaced and upgraded. The documented scope: a new 66-foot fence on galvanized posts, with 8-foot pickets and a 2×12 top trim, all secured with screws rather than nails for a stronger hold. The project also added a gate with a metal frame, and included a repair to Karen’s old privacy kit that needed a simple lock change.

Mustang’s photos of the finished job show cedar board-on-board fencing with a separate bottom board along the run — consistent with the documented scope, which didn’t specify a wood species but did call for durable materials suited to a coastal property.

A labeled diagram of a 66 foot fence run showing galvanized posts, cedar pickets, a 2×12 top trim, and a separate panel showing a metal-frame gate and an old privacy kit repaired with a lock change. The documented scope: a 66-ft fence replacement for Karen Patit FENCE RUN — 66 FT 2×12 top trim Galvanized posts · 8-ft pickets · screws (not nails) GATE & REPAIR Metal-frame gate Old privacy kit:lock changed From this project’s own documented facts (post content + photos). Not an external source.
S-1
DrawingThe documented scope: a 66-ft fence replacement for Karen Patit
BasisPublished job facts (post content + photos)
ScaleNot to scale
The scope Karen’s project covered: the fence run, and the gate and lock repair alongside it.
Rail side of a wood fence supported on steel posts
The rail side of the new fence on its steel posts.

Why galvanized posts make sense on a Galveston property

Galvanized posts were chosen partly because of Galveston’s coastal weather. The reason is electrochemical: in a conductive, salt-laden environment, two metals in contact corrode at different rates depending on how reactive each one is. The American Galvanizers Association’s standard table of electrode potentials in sea water lists zinc at −1.10 V versus carbon steel at −0.68 V — zinc is the more anodic (more negative) of the two, so it corrodes before the steel underneath it does. That is the documented mechanism behind “hot-dip galvanized posts resist rust”: the zinc coating is designed to sacrifice itself first, protecting the structural steel post for as long as the coating lasts.

Chart of electrode potential in sea water: carbon steel at negative 0.68 volts, zinc at negative 1.10 volts, with zinc being more anodic and corroding first. A cross-section of a galvanized post shows the zinc coating labeled sacrificed first and the steel core labeled protected. Why the zinc coating protects the steel post beneath it 0 Vmore anodic (corrodes first) → Carbon steel−0.68 V Zinc coating−1.10 V POST CROSS-SECTION zinc:sacrificedfirst steel core:protected Electrode potential in sea water (volts): more negative corrodes first. Zinc is more anodic than carbon steel, so in a salt-laden environment it corrodes before the post does.
S-2
DrawingWhy the zinc coating protects the steel post beneath it
BasisAmerican Galvanizers Association, “Galvanized Steel with Aluminum Parts”
ScaleNot to scale
Zinc’s lower (more negative) electrode potential is why it protects the steel post, not just coats it.
Wood privacy fence and gate along a narrow side passage
The new fence and gate along a narrow side passage of Karen’s property.

Privacy fence picket estimator

Straight-footage arithmetic for how many pickets a fence run needs, based on picket width and the gap between them. Not a quote — posts, corners and waste aren’t included. Defaulted to Karen’s 66 ft run; change any field.

Arithmetic: pickets = ceiling((run length in inches) / (picket width + gap)).

★★★★★
We just installed iron gate and it looks amazing thank you very much mustang fencing .
Jordan Carrillo · Google review · a year ago
★★★★★
I have hired Mustang fencing services to fix my backyard fencing. Good wood to used. I really like theirs work. Best of luck
Zaidbin Saif · Google review · a year ago
★★★★★
had an excellent experience with mustang fencing From the initial consultation to the final installation, the team was professional, punctual, and attentive to detail. They helped me choose the perfect fence style to match my property and ensured everything was installed with precision. The quality of materials is top-notch, and the fence has completely transformed the look and security of my home. I highly recommend mustang services to anyone looking for reliable and high-quality fencing services!
Abdul Wahab · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-02.

Questions we get about this

What did Mustang Fencing do for Karen Patit?
Replaced her aging 66-foot fence in Galveston, TX with a new fence on galvanized posts with 8-foot pickets and a 2×12 top trim, secured with screws, plus a metal-frame gate and a lock repair to her existing privacy kit.
Was this a new fence or a replacement?
A replacement. Karen reached out after deciding her existing, aging fence needed to be replaced and upgraded.
Why galvanized posts for a Galveston fence?
Galveston’s coastal, salt-air environment is more corrosive than inland sites. The American Galvanizers Association’s electrode-potential data shows zinc corrodes before the carbon steel it coats, so a hot-dip galvanized post’s zinc layer sacrifices itself first and protects the structural steel underneath.
What repair did the old privacy kit need?
The documented scope was a simple lock change on Karen’s existing privacy kit, handled as part of the same project as the fence replacement.
Does Mustang Fencing serve Galveston, TX?

Sources

Checked November 4, 2026. Rules change, so confirm with the City before you build.

  1. American Galvanizers Association, “Galvanized Steel with Aluminum Parts” — Standard electrode potentials of metals in sea water, including zinc (−1.10 V) and carbon steel (−0.68 V); zinc’s more anodic potential is why it corrodes preferentially and protects steel it coats.
Free on-site estimate

Have an aging fence that needs replacing?

We’ll walk the property, point out what’s actually failing, and put the materials and scope on one written estimate before any work starts.

Page reviewed November 4, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.