Project case study · Angleton, TX

A 23-Foot Fence Replacement for Christopher Stanley in Angleton, TX

Christopher Stanley’s aging fence had a weathered 23-foot section replaced with a new dog-ear picket wood fence, gate included. Here’s what Mustang documented about the job — plus what “dog-ear” actually means and why freshly built pine fencing looks pale until it’s stained, with a picket estimator below.

  • Reviewed Nov 9, 2026
  • Source: Southern Forest Products Association
  • 3 job photos
Wood privacy fence running the length of a back lawn
The new fence on Christopher Stanley’s Angleton property, running the length of the back lawn.
The short answer

Mustang Fencing replaced a weathered 23-foot fence section for Christopher Stanley in Angleton, TX, with a new dog-ear picket wood fence (gate included). The project photos on file show pine, not the Western Red Cedar an earlier version of this page claimed — corrected here.

23 ftWeathered fence section replaced
Dog-ear pineNew privacy-fence picket style, documented in project photos
30 days–6 moSFPA’s own wait time before staining new treated pine
Angleton, TXChristopher Stanley’s property

Sources: this project’s own documented facts and photos; Southern Forest Products Association. Checked November 9, 2026.

The job: a weathered 23-foot section, replaced

Christopher Stanley contacted Mustang Fencing about a 23-foot section of his fence that had aged and weathered over the years. Mustang removed that section and built a new one in its place, with post spacing, gate design and stain options worked out with Christopher before construction.

The project’s own photos show the old, weathered run standing right next to the freshly built replacement mid-job — the clearest documentation of what actually changed.

Diagram comparing a weathered existing fence section, which was replaced, against the new 23-foot dog-ear picket fence run built in its place THE REPLACEMENT THIS PROJECT’S OWN PHOTOS DOCUMENT EXISTING FENCE (WEATHERED) REPLACED — NOT KEPT NEW FENCE 23 FT — NEW DOG-EAR RUN
S-1
DrawingThe replacement this project’s own photos document
BasisThis project’s own documented photos (media 2540, 2541)
ScaleNot to scale
Illustrative, based on this project’s before/after photos — not a scale drawing of the yard.
Older wood fence beside garden sheds
The old, weathered fence run next to the freshly built replacement, mid-project.

What the material actually is

An earlier version of this page described the new fence as Western Red Cedar. Checking every photo on file for this job against the Drive job-photo archive (owner-approved for use sitewide, 2026-11-04) shows a pale, large-knotted, unstained board — consistent with pine, which the archive’s own classification labels this job’s fence. That’s the material named on this page now.

The fence is built in a dog-ear picket style: each picket’s top two corners are clipped at an angle instead of left square or cut to a point. It’s one of the most common residential privacy-fence profiles.

Two panels. Left: a row of dog-ear picket silhouettes with the top corners clipped at an angle. Right: text explaining that fresh pressure-treated pine looks pale and unstained at install, and that SFPA recommends waiting about 30 days before an oil-based semi-transparent stain or about 6 months before a solid-color stain, paint, or water-based stain on wet or not-redried treated wood. WHAT “DOG-EAR” MEANS, AND WHY NEW PINE LOOKS PALE AT FIRST DOG-EAR PICKET PROFILE TOP CORNERS CLIPPED AT AN ANGLE FRESH PINE, NOT YET STAINED Pale / unstained look at install SFPA: wait ~30 days before an oil-based semi-transparent stain, or ~6 months before a solid-color stain, paint, or water-based stain on wet / not-redried treated wood
S-2
DrawingWhat “dog-ear” means, and why new pine looks pale at first
BasisSouthern Forest Products Association (SFPA), Deck Finishing, Maintenance and Inspection; Pressure-Treated Southern Pine (2019 ed.)
ScaleNot to scale
General manufacturer/association guidance, not a guarantee of drying time for this specific yard’s conditions.
New pine privacy fence with exposed posts and rails along a backyard lawn beside a stone spa
The finished run beside the property’s stone water feature — the same yard and fence as the photo above.

Dog-ear picket count estimator

Straight linear-footage arithmetic, not a materials order — confirm exact counts with your installer. Default picket width (5.5 in) is the common actual width of a nominal 1×6 fence picket; change it if yours differs.

Picket count = (fence length in inches) ÷ (picket width + gap), rounded up. Doesn’t add extra for posts, corners or a gate opening — an estimate only, confirm with your installer.

★★★★
We took the services to replace our decade-old rotten fence with a modern one. The Services were Professional, completed the job on time, and the fence looked great, giving a new look to our house and they left the yard spotless. Highly recommend!
Irfan Lateef · Google review · Edited 2 years ago
★★★★★
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
Muqeet Mohammed Abdul · Google review · a year ago
★★★★★
I chose Mustang Fencing for my backyard due to their reputation for quality and security. Their wood fencing exceeded my expectations, durable and visually appealing. The customer service was top-notch, and the installation was quick and efficient.
Maryam Saeed · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-08.

Questions we get about this

What did Mustang Fencing do for Christopher Stanley in Angleton?

Replaced a weathered 23-foot section of his fence with a new dog-ear picket wood fence, including a gate, after working out post spacing and design details together.

What type of wood is the new fence?

Pine, built in a dog-ear picket style. (An earlier version of this page said Western Red Cedar; the job photos on file don’t support that, so it’s corrected here.)

What does “dog-ear” mean on a picket fence?

The top two corners of each picket are clipped at an angle instead of being left square or cut to a point. It’s one of the most common residential privacy-fence picket styles.

Why does the new fence look pale instead of stained?

Fresh pressure-treated pine is pale and sometimes greenish at install. Per the Southern Forest Products Association, wet or not-redried treated wood should dry before finishing — roughly 30 days before an oil-based semi-transparent stain, or up to 6 months before a solid-color stain, paint, or water-based stain.

Does Mustang Fencing build wood fences elsewhere near Angleton?

Sources

Checked November 9, 2026. Rules change, so confirm with the City before you build.

  1. Southern Forest Products Association, Deck Finishing, Maintenance, and Inspection — Wait times before finishing wet-treated and not-redried Southern Pine; ~30 days for semi-transparent oil-based stain, ~6 months for solid-color stain/paint/water-based stain.
  2. Southern Forest Products Association, Pressure-Treated Southern Pine (2019 edition) — Moisture content before/after treatment; most treated pine delivered without redrying; KDAT/ADAT; finishing treated wood.
Free on-site estimate

Got a weathered fence section that needs replacing near Angleton?

We’ll look at what’s actually failing — one section or the whole run — before any written estimate.

Page reviewed November 9, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.