Installing a 213’ Cedar Fence for Elaine and Steve Athanasiou in Santa Fe, TX
Elaine and Steve wanted a tall privacy fence that could run the length of their property and still look right on a sloped yard. Here’s the 213-foot cedar fence Mustang built them, and why cedar doesn’t need a sealed finish to hold up outdoors.

Mustang Fencing installed a 213-foot, 6-foot-tall cedar privacy fence for Elaine and Steve Athanasiou in Santa Fe, TX. Posts were set in concrete, panel heights were adjusted to follow the yard’s natural slope, and the cedar was left unstained to weather naturally. Santa Fe’s own Code of Ordinances sets no general residential fence height or setback rule — see our Santa Fe fencing page for the two specific cases it does cover.
Sources: USDA Forest Products Laboratory, Wood Handbook FPL-GTR-282 (2021), Table 14-1; City of Santa Fe Code of Ordinances, Ch. 3. Checked November 2, 2026.
The job: 213 feet of 6-foot cedar privacy fence
Elaine and Steve Athanasiou wanted a tall privacy fence running the length of their Santa Fe property — 213 feet of it, at 6 feet tall. Mustang Fencing set the posts in concrete and, because the yard isn’t flat, adjusted the height of individual panels along the way so the fence follows the land’s natural slope instead of stair-stepping or leaving gaps at the bottom.
The pickets were set with no gap for full privacy, and the cedar was left unstained to weather naturally rather than sealed with a finish — a choice that works because of how cedar is built, covered below.

Why cedar doesn’t need a sealed finish to hold up
Leaving cedar unstained wasn’t a maintenance shortcut — it’s a legitimate choice because of where cedar sits on the USDA Forest Products Laboratory’s decay-resistance scale. In the Wood Handbook (FPL-GTR-282, 2021, Table 14-1), which groups domestic wood species by natural heartwood decay resistance, most cedar species fall in the “Resistant” tier — one step below the top “Very Resistant” tier, but naturally more decay-resistant than many commonly used woods without any added treatment.
That’s why a cedar fence left to weather naturally, like this one, can still hold up outdoors — the tradeoff is cosmetic (the color fades toward a silvery gray) rather than structural. Homeowners who want to keep cedar’s warm original tone usually add a clear or semi-transparent finish instead, which is a look preference, not a durability requirement.
Post-count estimator for a long fence run
Plain arithmetic for a run like this one — not a measurement of the Athanasiou fence’s actual post count, and not a materials quote. Your installer sets real spacing based on soil, wind load and gate locations.
Posts = floor(run ÷ spacing) + 1, rounded for a straight run with no corners or gates. Arithmetic only, not a materials quote. Checked November 2, 2026.

What customers say on Google
5.091 Google reviews · read them all on Google
Excellent work. They came in handy after the hurricane hit our backyard. Friendly people too.
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
I have hired Mustang fencing services to fix my backyard fencing. Good wood to used. I really like theirs work. Best of luck
Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-02.
Questions we get about this
What did Mustang Fencing build for Elaine and Steve Athanasiou?
Does cedar need to be sealed or stained to hold up outdoors?
How many posts does a fence this long usually need?
Does Santa Fe have a fence height rule I need to follow?
Does Mustang Fencing serve Santa Fe, TX?
Sources
Checked November 2, 2026. Rules change, so confirm with the City before you build.
- USDA Forest Products Laboratory, Wood Handbook FPL-GTR-282 (2021), Table 14-1 — Groups domestic wood species by natural heartwood decay resistance; most cedar species fall in the “Resistant” tier, one below “Very Resistant.”
- City of Santa Fe, Texas, Code of Ordinances — Chapter 3: no general residential fence height, setback or material rule; only pool-fence (Sec. 10) and mobile-home-park boundary (Sec. 28(A)(1)) provisions.
Planning a long privacy-fence run of your own?
We’ll walk the property, account for any slope, and put post spacing and material on a written estimate before any order.