Project case study · Baytown, Texas

A Seamless Chain Link Fence Installation for Armando Barrera in Baytown, Texas

Armando Barrera needed a durable, secure boundary for a property with multiple access points in Baytown. The job: a 6-foot black 16-gauge chain link fence. Here it is in photos, plus the CLFMI industry standard a fence this height and material is built to.

  • Reviewed Nov 6, 2026
  • Source: CLFMI Product Manual 32 31 13
  • 4 job photos
Black vinyl-coated chain link fence running across a grassy field under a cloudy sky
The chain link fence line crossing the open lot, Baytown, Texas.
The short answer

Armando Barrera’s Baytown property was fenced with a 6-foot black 16-gauge chain link fence, chosen for security across a lot with multiple access points. The black coating adds a sleeker finish than galvanized fabric and resists weathering. Industry standard (CLFMI) calls for line posts no more than 10 ft apart, a 30-in. minimum footing at this height, and gate posts braced, trussed and sized larger than the line posts.

6 ftHeight of the black 16-gauge chain link fence installed for this job
10 ftMaximum spacing between line posts on center, per CLFMI’s own standard for this fence type
30 in.Minimum line-post footing depth CLFMI specifies at a 6-ft fence height
Braced + trussedWhat CLFMI requires of every gate post (not a line post) on a fence 6 ft or taller

Source: CLFMI Product Manual 32 31 13 (Chain Link Fence and Gates), §§ 2.9, 3.2.

The job: a 6-foot black 16-gauge chain link fence

Armando Barrera’s property in Baytown had multiple access points and boundaries to cover, and he wanted a fence that balanced security with a clean look. The job came together as a 6-foot black 16-gauge chain link fence. Black-coated chain link gives a more finished appearance than bare galvanized fabric and adds a layer of weathering resistance, which matters in Baytown’s humidity.

The photos below are from that job.

Black chain link fence around a grassy lot with utility boxes
The chain link fence line along the property boundary, Baytown, Texas.

What the industry standard calls for at 6 feet

The Chain Link Fence Manufacturers Institute (CLFMI) publishes a product manual covering how chain link fence and gates are supposed to be built. Two sections apply directly to a fence like this one: line-post spacing and footing depth, and what makes a gate post different from a line post.

Line posts — the posts carrying the fabric along a straight run, like the open-lot boundary in these photos — go in no more than 10 ft apart on center. The minimum footing depth is 24 in., plus 3 in. for every foot the fence height exceeds 4 ft, which works out to 30 in. for a 6-ft fence.

Diagram of a chain link fence line with posts spaced no more than 10 feet apart on center, and a footing depth callout of 30 inches at 6 foot fence height. max 10 ft on center Line posts no more than 10 ft apart, CLFMI’s own spacing limit 30 in. footingat 6 ft fence height CLFMI 3.2.A: minimum footing depth is 24 in. plus 3 in. per foot of fence height over 4 ft — 30 in. for a 6-ft fence like this one, with line posts no more than 10 ft apart.
S-1
DrawingLine posts at 10 ft intervals, footing scaled to height
BasisCLFMI Product Manual 32 31 13, § 3.2.A
ScaleNot to scale
CLFMI’s own spacing and footing-depth minimums for a fence at this height — not a measurement of this specific job.
Black chain link fence and gate on a rural gravel lot
A gate opening in the chain link line, Baytown, Texas.

Why a gate post is a different post

Every gate opening in a chain link fence needs more than a line post. CLFMI classifies gate posts as terminal posts, along with end, corner and pull posts, and requires them to be braced and trussed — a horizontal brace rail plus a diagonal truss rod — on any fence 6 ft or taller. The gate post itself also has to be a larger pipe than the line posts next to it, with the required outside diameter climbing as the gate leaf gets wider.

Diagram comparing an unbraced line post against a larger gate post fitted with a diagonal brace and truss rod, labeled as required on fences 6 feet and taller. LINE POSTno bracing required GATE / TERMINAL POSTbraced + trussed, 6 ft and up A gate post is a terminal post — it needs bracing a line post doesn’t CLFMI 3.2.C: end, corner, pull and gate posts must be braced and trussed (a horizontal brace rail plus a diagonal truss rod) on fences 6 ft and higher. Table 2.9B also requires a larger-OD post at the gate than along the line, scaling with leaf width.
S-2
DrawingA gate post is a braced terminal post, not a line post
BasisCLFMI Product Manual 32 31 13, § 3.2.C and Table 2.9B
ScaleNot to scale
A gate opening carries swing load a straight fence line never does — which is why the post under it is built differently.
Black chain link fence around a lawn with utility boxes in the distance
The finished chain link boundary enclosing the property, Baytown, Texas.

6-ft chain link: what the standard calls for

Pick a gate leaf width. Based on CLFMI Product Manual 32 31 13 for chain link fabric up to 6 ft tall — the height built on this job.

Gatepost size
Line postsNo more than 10 ft apart on center; 30 in. minimum footing depth at 6 ft fence height.

Source: CLFMI Product Manual 32 31 13, Table 2.9B (gatepost OD by leaf width, fabric up to 6 ft) and § 3.2 (line-post spacing, footing depth, terminal-post bracing).

★★★★★
chainlink fence installation by mustang fencing, looks really great, thanks.
karina hernandez · Google review · a year ago
★★★★★
Mustang’s team installed iron fence for me and did an absolutely incredible job! I would recommend this company to anyone I know!
Theodore Howitt · Google review · a year ago
★★★★★
had an excellent experience with mustang fencing From the initial consultation to the final installation, the team was professional, punctual, and attentive to detail. They helped me choose the perfect fence style to match my property and ensured everything was installed with precision. The quality of materials is top-notch, and the fence has completely transformed the look and security of my home. I highly recommend mustang services to anyone looking for reliable and high-quality fencing services!
Abdul Wahab · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-06.

Questions we get about this

What size chain link fence was installed for Armando Barrera?
A 6-foot black 16-gauge chain link fence, installed on a Baytown, Texas property with multiple access points.
How far apart are chain link line posts supposed to be?
Per CLFMI’s product manual, no more than 10 ft apart on center.
How deep does a chain link post footing need to be at 6 feet?
CLFMI’s minimum is 24 in., plus 3 in. for every foot of fence height over 4 ft — 30 in. at a 6-ft fence height.
Does a chain link gate post need bracing?
Yes. CLFMI classifies gate posts as terminal posts and requires them to be braced and trussed (a horizontal brace rail plus a diagonal truss rod) on fences 6 ft and taller, with a larger post diameter than the line posts.
Why choose black-coated chain link over galvanized?
Black (vinyl or polymer) coating gives a more finished look than bare galvanized fabric and adds a layer of resistance to weathering, which is useful in a humid climate like Baytown’s.

Sources

Checked November 6, 2026. Rules change, so confirm with the City before you build.

  1. CLFMI Product Manual 32 31 13, Chain Link Fence and Gates — § 3.2.A line-post spacing (10 ft max on center) and footing depth (24 in. + 3 in. per ft over 4 ft); § 3.2.C terminal/gate post bracing and trussing requirement for fences 6 ft+; Table 2.9B gatepost OD by leaf width for fabric up to 6 ft.
Free on-site estimate

Need a chain link fence for a commercial or open-lot property?

We’ll walk the boundary, talk through gauge, coating and gate placement, and put it on a written quote.

Page reviewed November 6, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.