Project case study · Manvel, TX

A 380-Foot Pine 3-Rail Fence, Rot Boards and 2 Gates for April Roberts in Manvel, TX

April Roberts wanted a fence sturdy enough for her wide-open Manvel property and gates she could count on for vehicle and foot access. Here’s what Mustang documented about the build: a 380-foot pine fence on 3 horizontal rails with rot boards, a double driveway gate and a second gate for easy access, plus how the crew kept the fence line level across a slight slope — and how Manvel’s own fence code explains the rail and rot-board counts.

  • Reviewed Nov 8, 2026
  • Source: City of Manvel Code of Ordinances
  • 3 job photos
Wood privacy fence beside a lawn with stepping stones
April Roberts’s 380-foot pine fence along the side yard of her Manvel, TX property.
The short answer

Mustang Fencing built April Roberts a 380-foot pine fence on 3 horizontal rails with rot boards and 2 gates — a double gate for the driveway and a second, more compact gate for easy access — in Manvel, TX, adjusting rail heights to follow a slight slope on one side of the property while keeping the top line level.

380 ftTotal fence length
3 railsPer Manvel’s own fence standard
2 gatesDouble driveway gate + 1 pedestrian gate
Manvel, TXSlight slope on one side, accounted for

Sources: this project’s own documented facts and photos; City of Manvel Code of Ordinances, Ch. 77 Zoning, Sec. 77-43 and Exhibit A. Checked November 8, 2026.

The job: a 380-foot pine fence, 3 rails, rot boards and 2 gates

April Roberts asked for a fence that could handle the wide-open layout of her Manvel property: a 380-foot pine fence built on 3 horizontal rails with rot boards along the base, plus 2 gates — a double gate for the driveway with heavy-duty hinges and a secure locking mechanism, and a second, more compact gate for easy pedestrian access.

Mustang’s crew prepared the site, leveled the ground, and anchored the posts before building out the full 380-foot run end to end.

Solid wood privacy fence photographed at dusk beside equipment
The second gate on April’s property — compact, with strap hinges and a slide-bolt latch.

What ‘on 3 rails’ means, per Manvel’s own fence standard

Manvel’s Exhibit A construction standard spells out exactly what “3 rails” means on a wood privacy fence: three horizontal 2×4 boards placed between each section of posts, behind the pickets. The bottom rail sits within 12 inches of the bottom of the pickets, the top rail within 16 inches of the top, and the middle rail goes midway between the two. Posts are spaced at a maximum of 7 feet.

That’s a structural spec, not a see-through “ranch rail” look — the 3 rails sit behind solid pickets, which is exactly what April’s fence shows: a solid pine privacy fence, framed on 3 rails underneath.

Diagram of a wood privacy fence section between two posts, showing three horizontal rails — top, middle and bottom — behind solid pickets, with a rot board at the base and a post spacing dimension MANVEL’S 3-RAIL WOOD FENCE STANDARD (EXHIBIT A, ITEMS 8-9) POST POST PICKETS NAILED TO 3 RAILS (SOLID, NOT EXPOSED) TOP RAIL MID RAIL BOTTOM RAIL ROT BOARD AT BASE PICKET HEIGHT POST SPACING: 7 FT MAX (ITEM 4)
S-1
DrawingManvel’s 3-rail wood fence standard
BasisCity of Manvel Code of Ordinances, Exhibit A, items 4, 8-9
ScaleNot to scale
Manvel’s own published rail placement standard — not a measurement of this specific fence.

Why ‘rot boards’ is plural on a 380-foot run

A single rot board doesn’t run the full length of a fence. Manvel’s standard sizes them at 14 feet, spanning 3 posts for added strength, in 6 or 8 inch widths — with one exception: at the very end of a run, if the remaining distance doesn’t divide evenly, a shorter 7-foot board is used to complete it.

Run that math on a 380-foot fence and “rot boards” (plural) adds up fast — use the calculator below to see how many.

Diagram comparing a standard 14-foot rot board spanning 3 posts against a shorter 7-foot rot board used only to complete the end of a fence run, with a 6 to 8 inch board width callout MANVEL’S ROT BOARD STANDARD (EXHIBIT A, ITEMS 6-7) 14 FT ROT BOARD — SPANS 3 POSTS 6-8 IN BOARD WIDTH 7 FT BOARD — END OF RUN ONLY USED ONLY TO COMPLETE A RUN (ITEM 7) April’s run: 380 ft — see the rot board calculator below
S-2
DrawingManvel’s rot board standard
BasisCity of Manvel Code of Ordinances, Exhibit A, items 6-7
ScaleNot to scale
The rot board sizing rule behind why a 380-ft fence needs more than one.

Rot board count calculator

Straight arithmetic from Manvel’s own published fence standard (Exhibit A, items 4, 6-7): rot boards run 14 ft and span 3 posts, with a 7-ft board only to complete the end of a run. Pre-filled with April’s own 380-ft fence and Manvel’s 7-ft max post spacing.

City of Manvel Code of Ordinances, Ch.77 Zoning, Exhibit A, items 4, 6-7. Estimate only — the permit application and an on-site measurement govern the actual count.

Keeping a straight, level top line across a sloped side yard

Part of April’s property had a slight slope on one side. A fence built with uniform panel heights on sloped ground either steps down in blocks or tilts out of level — neither of which was acceptable here. Mustang’s crew adjusted the rail heights panel to panel, letting the fence follow the natural contours of the land at the bottom while keeping the top line level and straight all the way down the 380-foot run.

Diagram of three fence panels on rising ground, each panel a different height so the bottom follows the slope while the top edges line up level and straight FOLLOWING THE GRADE ON ONE SIDE WHILE KEEPING THE TOP LINE LEVEL DOCUMENTED SLOPE — ONE SIDE OF THE PROPERTY TOP LINE KEPT LEVEL AND STRAIGHT (as documented) rail heights adjusted panel to panel to follow the rising grade Based on the published job facts (post content), not an external source.
S-3
DrawingFollowing the grade while keeping the top line level
BasisThis project’s own documented facts
ScaleNot to scale
Illustrative, not a survey of April’s actual grade. What’s documented: a slight slope on one side, and rail heights adjusted so the top line stayed level and straight.
★★★★★
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
Muqeet Mohammed Abdul · Google review · a year ago
★★★★★
Installed Stained cedar wood fence yesterday by mustang fencing, thanks for the beautiful work.
Shahrukh Abdul · Google review · a year ago
★★★★★
I have hired Mustang fencing services to fix my backyard fencing. Good wood to used. I really like theirs work. Best of luck
Zaidbin Saif · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-11-08.

Questions we get about this

What did Mustang Fencing build for April Roberts?

A 380-foot pine fence on 3 horizontal rails with rot boards along the base, plus 2 gates — a double gate for the driveway with heavy-duty hinges and a secure locking mechanism, and a second, more compact gate for easy access — in Manvel, TX.

What does a ‘3-rail’ pine fence mean here?

Per Manvel’s own fence construction standard, it means 3 horizontal 2×4 rails placed behind the pickets on each post-to-post section — a structural framing spec, not an exposed, see-through rail style.

Why does a 380-foot fence need more than one rot board?

Manvel’s standard sizes rot boards at 14 feet, spanning 3 posts, with a shorter 7-foot board only at the end of a run if the remaining distance doesn’t divide evenly. Use the calculator above to estimate the count for a given length.

How did Mustang handle the slope on part of the property?

The crew adjusted rail heights panel to panel so the bottom of the fence follows the land’s natural contours while the top line stays level and straight.

Does Mustang Fencing build pine fences and gates elsewhere near Manvel?

Sources

Checked November 8, 2026. Rules change, so confirm with the City before you build.

  1. City of Manvel, TX Code of Ordinances, Ch. 77 Zoning, Sec. 77-43 Fences + Exhibit A — Exhibit A item 4 (7-ft max post spacing); items 6-7 (rot board width and 14-ft/7-ft length spec); items 8-9 (3-rail placement spec).
Free on-site estimate

Planning a long pine fence run with rot boards near Manvel?

We’ll walk the full property line with you — including any slope — before any written estimate.

Page reviewed November 8, 2026 by Mustang Fencing Services, Galveston. Next review due May 2027.