Fence project · Tiki Island, TX

Transforming Sean Cowan’s Tiki Island Home with a 77-Foot Pine Fence

A 77-foot pressure-treated pine fence underway for Sean Cowan in the Village of Tiki Island — the first post set in concrete, with lumber staged for the rest of the run, and what the Village’s own ordinance asks for in a fence like this.

  • Reviewed Oct 24, 2026
  • Source: Village of Tiki Island Code of Ordinances
  • Interactive picket & gap estimator
First pine fence post set in concrete, with stacked pressure-treated lumber staged in a Tiki Island side yard
The first post for Sean Cowan’s 77-foot pine fence, set in concrete, with lumber staged for the rest of the run.
The short answer

These photos document the start of Sean Cowan’s 77-foot pressure-treated pine fence in the Village of Tiki Island: the fence line marked across the side yard, and the first post set in concrete with lumber staged for the rest of the run. No finished-fence photo is available for this project, so this page doesn’t describe a completed reveal. Tiki Island is a separate incorporated Village, not part of the City of Galveston, and its own ordinance caps fences at six feet and requires a see-through style except where the ordinance provides otherwise.

77 ftFence run documented for this project (Sean Cowan, Tiki Island)
6 ftTiki Island’s maximum fence height, no batter boards (Sec. 6-302(e))
See-throughRequired fence style except where the ordinance provides otherwise (Sec. 6-302(b))
Village of Tiki IslandA separate incorporated town, not part of the City of Galveston

Source: Village of Tiki Island Code of Ordinances, Secs. 6-300 to 6-303 (Village permit copy), checked September 27, 2026 (same citations used on /fence-gate-installation-tiki-island-tx/).

What’s in these photos

The two photos attached to this project show site preparation, not a finished fence: a string line marking the fence run across the side yard with post holes staked out, and the first pine post set in concrete with pressure-treated lumber staged nearby for the remaining run. Pine is pressure-treated for ground contact and is a common, economical choice for a fence this length.

We’re not describing a finished look here, since no completed-fence photo was provided for this project. See pine fence installation for the material, and fence & gate installation in Tiki Island for the Village’s rules in full.

Three panels. Left, photographed: a string line and marked post holes across a side yard, step one. Middle, photographed and used as this page’s hero image: the first pine post set in concrete with lumber staged nearby, step two. Right, not photographed: the remaining roughly 76 feet of fence line, shown as dashed outlines, with a note that no finished-fence photo is available for this project. What these two photos document PHOTOGRAPHED STEP 1 Fence line marked String line across the sideyard, holes marked out Source: photo 2865 PHOTOGRAPHED STEP 2 First post set Post set in concrete,lumber staged nearby Source: photo 2866 (hero image) NOT PHOTOGRAPHED Remaining ~76 ft No finished-fence photois available for this project Not shown here
S-1
DrawingWhat’s documented so far
BasisPhotos 2865 and 2866 attached to this project post; no finished-fence photo was provided
ScaleNot to scale
Two photos exist for this project: fence line marked, and the first post set. No finished-fence photo was provided.

Why Tiki Island’s ordinance matters for the design

Tiki Island isn’t part of the City of Galveston — it’s a separate incorporated Village with its own Code of Ordinances. Division 6 caps every fence at six feet and, except where the ordinance otherwise provides, requires a see-through type: solid privacy panels generally aren’t a see-through design. The ordinance doesn’t define “see-through” precisely, so a semi-private style (shadowbox, board-on-board, or a picket fence with gaps) is worth confirming with the Village building official before material is ordered.

Because no finished-fence photo exists for this project, this page can’t say which style Sean’s fence ended up as — only that the Village’s rule is what any pine fence on Tiki Island, including this one, has to be designed against. See privacy fence height rules across Galveston County towns for how Tiki Island compares to its neighbors.

Tiki Island’s rule, at a glance

Village requirement
Maximum height6 ft total, no batter boards at the bottom
StyleSee-through, except where the ordinance otherwise provides
Metal hardwareHot-dipped galvanized steel for posts/fasteners if metal is used
Before buildingSurvey, fence-line drawing, Village building permit

Village of Tiki Island Code of Ordinances, Secs. 6-300 to 6-303. Checked September 27, 2026.

Elevation drawing of a generic see-through pine picket fence: four posts set below grade, two horizontal rails running top and bottom, and vertical pickets with visible gaps between them filling each bay. Posts, rails and pickets — a see-through pine fence, generically set below grade Gaps between pickets — the Village’s see-through rule GAPVISIBLE
S-2
DrawingPosts, rails and pickets
BasisGeneral wood-fence framing practice, drawn with visible gaps to match the Village’s see-through requirement — not a measurement of this project
ScaleNot to scale
A see-through design, generically: posts, two rails, and pickets with a visible gap between them.

Where a few fence styles land against Tiki Island’s six-foot cap

Illustrative heights, not a measurement of this project.

Open picket, 4 ft4 ftOpen picket, 6 ft (at the cap)6 ftSolid privacy example, 7 ft7 ftSix-foot maximum, every fence (Sec. 6-302(e))
undefined

Pine picket fence & gap estimator

Enter a fence run to see about how many pickets and posts a see-through pine fence like Tiki Island’s ordinance asks for would take, and roughly how open the design is. It’s arithmetic, not a manufacturer spec.

0PICKETS
Posts
Open area
See-through checkTiki Island requires a see-through fence except where the ordinance provides otherwise. Any gap > 0″ is open; solid board-to-board is not. Confirm your exact design with the Village building official.

Picket count: linear feet × 12 ÷ (picket width + gap), rounded up. Post count: one post per spacing interval, plus one. Open-area %: gap ÷ (picket width + gap). All arithmetic, not a manufacturer figure. See-through rule: Village of Tiki Island Code of Ordinances Sec. 6-302(b), checked September 27, 2026.

Fence line marked with string across a Tiki Island side yard before posts are set, with lumber and tools staged nearby
The fence line marked out across the side yard, before the posts went in.

Planning a fence on Tiki Island?

★★★★★
Amazing work will go ahead and recommend everyone in friends and family We installed 8ft tall double sided stained cedar wood fence in our backyard, it’s really looks great, installed perfectly nice finishing and cost effective, thanks mustang fencing.
Muqeet Mohammed Abdul · Google review · a year ago
★★★★★
Installed Stained cedar wood fence yesterday by mustang fencing, thanks for the beautiful work.
Shahrukh Abdul · Google review · a year ago
★★★★★
Fenomenal job, really nice guy. Contacted them after hurricane knocked down my fence facing the street and got it done really quickly.
Patricia Rios · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-10-19.

Questions we get about this

What do these photos show for Sean Cowan’s Tiki Island fence project?
Two photos: the fence line marked with a string across the side yard, and the first post set in concrete with lumber staged for the rest of the 77-foot run. No finished-fence photo is available for this project.
Why does Tiki Island limit fence height to six feet?
The Village of Tiki Island Code of Ordinances, Sec. 6-302(e), caps every fence at a total of six feet, with no batter boards permitted at the bottom. It applies Village-wide, not just on this project.
Does Tiki Island allow a solid privacy pine fence?
The ordinance requires a see-through type fence except where it otherwise provides (Sec. 6-302(b)); solid privacy panels generally aren’t a see-through design. The Village doesn’t define “see-through” precisely, so confirm a semi-private style with the building official before you order material.
Do I need a permit and survey for a fence in Tiki Island?
Yes. Fence plans in Tiki Island are approved by the board of aldermen or the building official before work starts, and a state-licensed survey is part of that process. See fence & gate installation in Tiki Island for the steps.
Do I need to call 811 before the post holes go in?
Yes. Fence post holes commonly go deeper than the 16 inches that triggers Texas’s one-call law, so whoever digs must notify 811 at least 48 hours ahead, not counting weekends and holidays. See calling 811 before a fence goes in.

Sources

Checked September 27, 2026. Rules change, so confirm with the City before you build.

  1. Village of Tiki Island Code of Ordinances, Chapter 6, Division 6: Fences (Village permit copy) — Secs. 6-300 to 6-303: approval process, six-foot height cap, no batter boards, see-through requirement, hot-dipped galvanized hardware, and the survey/permit process.
  2. Village of Tiki Island Code of Ordinances, Chapter 6 (Municode) — The full Buildings and Construction chapter, including Division 6.
Free on-site estimate

Planning a fence in Tiki Island?

We’ll measure your lot, design to the Village’s six-foot, see-through rule, and give you a written estimate before any fence order.

Page reviewed October 24, 2026 by Mustang Fencing Services, Galveston. Next review due April 2027.