Black vinyl-coated chain link · Galveston, TX

Black Chain Link Fence in Galveston, TX

Black chain link isn’t a different fabric that happens to be painted black — it’s one coated layer among several the industry’s own install spec expects to match. Here is what "black" actually covers as a system: which parts should carry the same coating class and color, the one part that usually doesn’t, and a checklist for your own quote.

  • Reviewed Oct 27, 2026
  • Source: CLFMI 32 31 13 install spec
  • Interactive color-match checklist
Black vinyl-coated chain link fence and gate around a yard
A black, polymer-coated chain link walk gate — the fabric this page’s color-match system starts from.
The short answer

Black chain link fabric is coated per ASTM F668, in one of exactly four standard colors under ASTM F934: dark green, olive green, brown or black. But the industry’s own installation spec (CLFMI 32 31 13) doesn’t stop at the fabric — it separately calls for the framework (line posts and top rail), the fittings (caps, bands, clamps) and the gate frame to each "match" that same coating color. The one common exception: barbed wire strand is explicitly allowed to stay uncoated even on an otherwise color-matched fence.

4 colorsASTM F934 standard polymer colors for coated chain link: dark green, olive green, brown and black
4 partsSeparate components CLFMI’s own spec calls to match coating color: fabric, framework, fittings, gate frame
Often bareCLFMI’s own template allows barbed wire’s actual barbs to stay uncoated even on a polymer-coated order

Source: Chain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial and Security Chain Link Fence and Gates (32 31 13).

A coated system, not just colored mesh

It’s easy to assume "black chain link" just means the diamond-mesh fabric got a dark coating and everything else stays the usual bright galvanized silver. The industry’s own install guide doesn’t treat it that way. Its fabric clause lists color as one of the things to specify right alongside the polymer construction class — dark green, olive green, brown or black, per ASTM F934 — covered in the same breath as the ASTM F668 construction classes (1 extruded, 2a extruded and adhered, 2b fused and adhered) that our black vs. galvanized comparison already goes deep on and this page doesn’t repeat.

What that same manual does that’s easy to miss: it writes a separate color-match clause for the framework (line posts and top rail), another for fittings, and another for the gate. Each one, independently, says the part should match the fabric’s coating color — which only matters to call out because nothing stops a supplier from quoting coated black fabric on bare galvanized hardware unless someone asks.

Five boxes in a row: fabric, framework (line posts and top rail), fittings, and gate frame are shown as dark matched boxes each citing the manual clause calling for matching coating color, while a fifth box for the barbed wire arm is shown dashed and unmatched, noting the hardware has no color option at all under ASTM F626. ONE COATING SYSTEM, SPECIFIED PART BY PART — CLFMI 32 31 13 FABRICASTM F668 polymercolor per ASTM F934(1 of 4 standard colors) FRAMEWORKLine posts & top rail"Color to matchfabric" (spec text) FITTINGSCaps, bands, clamps"Match color tofence system" GATE FRAME& gatepostsMatch coating & colorto the framework BARBED WIRE ARMASTM F626 hardwareplain galvanized —no color option at all Text in each box paraphrases the manual’s own clause for that component, not a universal rule for every supplier.
CL-1
DrawingFive parts, one coating spec
BasisChain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial and Security Chain Link Fence and Gates (32 31 13), Part 2 Products. Not to scale
ScaleNot to scale
Four components the manual calls to match; one piece of hardware it doesn’t.

The four standard colors — and where the construction class still matters

ASTM F934 is the standard the coating color itself has to comply with, and CLFMI’s template names all four options it covers: dark green, olive green, brown and black. That color choice is independent of the construction class — any of the four colors can be built as ASTM F668 Class 1 (extruded), Class 2a (extruded and adhered) or Class 2b (fused and adhered). The class affects how tightly the polymer bonds to the zinc-coated wire underneath (covered in depth on our black vs. galvanized page); the color is simply which of the four the coating is tinted.

Four color swatches labeled black, dark green, olive green and brown, representing the four ASTM F934 standard polymer coating colors for chain link fabric, with a note that any color can pair with any ASTM F668 construction class. ASTM F934 — FOUR STANDARD POLYMER COATING COLORS BLACK DARK GREEN OLIVE GREEN BROWN Any of the 4 colors can be built with any ASTM F668 construction class (1 extruded / 2a extruded & adhered / 2b fused & adhered). Class comparison is covered on our black vs. galvanized page — not repeated here.
CL-2
DrawingASTM F934’s four standard colors
BasisCLFMI 32 31 13 fabric clause, citing ASTM F934. Color swatches are illustrative, not a color match
ScaleNot to scale
Color and construction class are two separate questions to ask — this page covers color; the class comparison lives on our black vs. galvanized page.

Who the manual expects to match, part by part

ComponentGoverning clauseWhat it says
FabricPolymer Coated Steel Fabric (ASTM F668 + F934)Color specified as one of 4 standard colors (dark green, olive green, brown, black)
Framework (posts & rail)Polymer Coated FrameworkColor to match the fabric, per specification
Fittings (caps, bands, clamps)Polymer Coated Color Fittings"Match color to fence system"
Gate frame & gatepostsSwing Gates / slide gate clauseMatch coating type and color to that specified for the framework
Barbed wire strand & armsPolymer Coated Barbed Wire / Barbed Wire ArmsStrand may match or stay uncoated by template option; the steel arm hardware itself has no color option

Chain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial and Security Chain Link Fence and Gates (32 31 13), Part 2 Products.

Galvanized chain link fence with a wide drive gate across a residential lot
Galvanized chain link framework, Galveston — the kind of hardware this page’s checklist asks you to confirm against a coated fabric order.
Galvanized chain link fence enclosing a residential lot, seen from the street
The same installation from the street.
Galvanized chain link gate panel on a ground track across a driveway at a brick house
A galvanized chain link gate — the Swing Gates clause is what calls for a gate frame to be color-matched on a coated order.

Which parts has your quote confirmed as matched black coating?

Check off each part as your quote confirms it. Based on the industry's own spec language for a polymer-coated chain link system (CLFMI 32 31 13) — a planning checklist, not a quote.

Fabric
Framework
Fittings
Gate

Source: Chain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial and Security Chain Link Fence and Gates (32 31 13), Part 2 Products — the Polymer Coated Framework, Polymer Coated Color Fittings, Swing Gates and Polymer Coated Barbed Wire clauses. A checklist, not a quote.

★★★★★
chainlink fence installation by mustang fencing, looks really great, thanks.
karina hernandez · Google review · a year ago
★★★★★
Mustang's team installed iron fence for me and did an absolutely incredible job! I would recommend this company to anyone I know!
Theodore Howitt · Google review · a year ago
★★★★★
We just installed iron gate and it looks amazing thank you very much mustang fencing .
Jordan Carrillo · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-10-26.

Questions we get about this

What colors does black chain link actually come in?
The industry template (CLFMI 32 31 13) names four standard polymer colors under ASTM F934: dark green, olive green, brown and black. Black is one specific, named option — not a generic description of any dark coating.
Do the posts and rails need to be black too, or just the mesh?
Per the manual’s own Polymer Coated Framework clause, the framework color should match the fabric. A plain galvanized (silver) framework under black fabric is a common shortcut, not what the spec calls for — ask directly if your quote includes it.
Is the gate included in the color match?
Yes — the Swing Gates clause (and the slide-gate clause for sliding gates) separately calls for the gate frame and gateposts to match the coating type and color specified for the fence framework.
Is barbed wire coated to match a black fence?
Not necessarily. CLFMI’s own template for Polymer Coated Barbed Wire offers an option to leave the barbs themselves uncoated even when the strand wire is color-matched, and the separate Barbed Wire Arms hardware has no color option at all.
Does the color choice change the construction class (1, 2a, 2b)?
No — color (ASTM F934) and construction class (ASTM F668) are specified separately. Any of the four standard colors can be built in any class. See our black vs. galvanized page for what the classes themselves change.

Sources

Checked October 27, 2026. Rules change, so confirm with the City before you build.

  1. Chain Link Fence Manufacturers Institute, Guide for Specifying Commercial/Industrial and Security Chain Link Fence and Gates (32 31 13) — Part 2 Products: fabric color (ASTM F934, 4 standard colors), Polymer Coated Framework, Polymer Coated Color Fittings, Swing Gates, Polymer Coated Barbed Wire and Barbed Wire Arms clauses.
  2. ASTM International, F668-25, Standard Specification for Polymer-Coated Steel Chain-Link Fence Fabric — Three polymer coating construction classes (1, 2a, 2b) applied over the metallic-coated wire; referenced here for context, compared in depth on our black vs. galvanized page.
Free on-site estimate

Ordering a black chain link fence?

We’ll confirm which parts of your fence — fabric, framework, fittings and gate — are actually color-matched before the quote is final. Free estimates across Galveston County.

Page reviewed October 27, 2026 by Mustang Fencing Services, Galveston. Next review due April 2027.

PLAN YOUR FENCE OR GATE PROJECT WITH US TODAY

Planning a new fence, a driveway gate or an automated entry? Tell us about your property and we’ll set up a free on-site estimate. We work with homeowners, HOAs and businesses across Galveston Island and Galveston County.

Prefer to talk? Call (346) 910-8641.

WHAT OUR CLIENTS ARE SAYING

Mustang Fencing

WE PROUDLY SERVE GALVESTON ISLAND & GALVESTON COUNTY

Areas we serve:

Galveston TX

Galveston Island

Jamaica Beach TX

Tiki Island TX

Bayou Vista TX

La Marque TX

Texas City TX

Hitchcock TX

Santa Fe TX

Dickinson TX

Bacliff TX

San Leon TX

Kemah TX

League City TX

Clear Lake Shores TX

OUR PARTNERS

Galvanized chain link fence with a wide drive gate across a residential lot
Wood privacy fence with a double gate and black hardware