Lattice top vinyl fence · Galveston, TX

Lattice Top Vinyl Fence in Galveston, TX

A lattice-top vinyl fence is really two panels stacked: a solid PVC privacy or picket base for the lower section, topped with an open lattice panel for light and airflow. Galveston’s own fence ordinance treats a "solid" fence and one that’s "at least 60% transparent" differently in a front yard — and unlike a wood lattice top, PVC never needs staining or sealing.

  • Reviewed October 27, 2026
  • Source: Galveston LDR §2.501 · ASTM F964
  • Height-rule checker
White vinyl picket fence between elevated coastal homes
A vinyl picket fence, East End Galveston — the kind of solid base a lattice-top design builds on.
The short answer

It depends on where the fence sits on the lot. Galveston’s residential fence ordinance caps a solid fence in a front yard at 4 feet, but allows 5 feet (6 feet for single-family attached or multifamily) if the whole fence is at least 60% transparent — open lattice is the kind of design that can get a fence into that category. Anywhere else on a residential lot, the cap is a flat 8 feet whether the fence is solid or open. And because the material is rigid PVC (ASTM F964), not wood, the lattice top never needs staining or sealing — manufacturer cleaning guidance is simply a non-abrasive soap and a soft cloth.

4 ftMax height for a solid fence in a residential front yard (Galveston LDR §2.501(B))
5–6 ftFront-yard max if the whole fence is at least 60% transparent — 5 ft single-family, 6 ft attached/multifamily
8 ftMax height anywhere else on a residential lot, solid or open
No stainingRigid PVC (ASTM F964) doesn’t rot or need the stain/seal upkeep a wood lattice top does

Sources: City of Galveston Land Development Regulations, Division 2.500, Sec. 2.501; ASTM F964-13; CertainTeed Bufftech installation guide; Illusions Vinyl Fence cleaning FAQ.

A lattice-top vinyl fence is two panels in one

The lower section is a standard solid vinyl panel — privacy or picket, built from the same rigid PVC covered by ASTM F964 ("rigid poly (vinyl chloride) (PVC) exterior profiles for use in assembling agricultural, commercial, and residential fencing and railing") as every other vinyl style on our vinyl fence guide. The upper section is open lattice — a criss-cross panel that lets light and air through where a fully solid fence wouldn’t. Together, they give a yard privacy at eye level without a completely solid wall above it.

The height question is where it gets specific to Galveston: the city’s residential fence ordinance caps a solid fence at one height and a fence that’s at least 60% transparent at a taller one, in a front yard. That rule is why this design comes up at all — the same way it does for the wood version of this idea, covered separately on our board & lattice wood fence page.

Bar chart comparing Galveston residential fence height caps: a solid fence in a front yard is capped at 4 feet; a front-yard fence that is at least 60 percent transparent is capped at 5 feet for single-family (6 feet for single-family attached or multifamily); and a fence anywhere else on a residential lot is capped at 8 feet regardless of transparency.RESIDENTIAL FENCE HEIGHT CAPS — GALVESTON LDR §2.501(B)4 ftFront yard,solid fence5 ftFront yard,≥60% transparent*8 ftAnywhere elseon the lot*5 ft for single-family; 6 ft for single-family attached or multifamily — same 60% rule, different cap.
V-1
DrawingFront-yard height math: solid vs. open
BasisCity of Galveston LDR, Division 2.500, Sec. 2.501(B)
ScaleNot to scale
The same lot, three different height caps — the deciding factor is location on the lot and, in a front yard, how open the fence is.

Galveston LDR §2.501(B) residential fence height caps

LocationSolid fenceAt least 60% transparent
Front yard, single-family4 ft5 ft
Front yard, single-family attached or multifamily4 ft6 ft
Anywhere else on a residential lot8 ft8 ft (transparency not required)
Tennis court fence12 ft12 ft

City of Galveston Land Development Regulations, Division 2.500, Sec. 2.501(B).

Where the lattice actually changes anything

Outside the front yard, the cap is a flat 8 feet whether the fence is solid or open — the ordinance doesn’t reward transparency there. A lattice top on a backyard or side fence is purely a design and airflow decision: a common approach is a roughly 6-foot solid panel with a foot and a half to two feet of lattice on top, landing at or under that 8-foot cap, but that split is an example, not a code requirement.

In a front yard, it’s different. Going above the 4-foot solid cap requires the whole fence to be at least 60% transparent — not just the lattice portion. Neither the ordinance nor the vinyl fence industry publishes how that percentage gets measured across a mixed solid-and-lattice design, so if the goal is extra front-yard height, confirm the measurement method with the City’s Development Services Department, and ask the manufacturer for the specific lattice panel’s own published open-area rating — a manufactured PVC lattice panel usually has one, unlike site-built wood lattice.

Elevation drawing of a fence with two posts, a lower solid PVC panel section labeled as the privacy or picket base with an example height of 6 feet, and an upper open PVC lattice section labeled for light and airflow with an example height of 1.5 to 2 feet. A note gives the generic post hole size and depth from a manufacturer installation guide and states no post-spacing table is published for this style specifically.A SOLID PVC BASE WITH AN OPEN LATTICE TOP (EXAMPLE)solid PVC privacy or picket baseopen PVC lattice (light + airflow)6 ft panel (example)1.5–2 ft lattice (example)Post hole: ~10 in. (4x4) or~12 in. (5x5), 30 in. deep,concrete-filled.— CertainTeed Bufftech installguide (no style-specific tablefor this style is published).
V-2
DrawingHow a lattice-top vinyl fence is usually built
BasisCertainTeed Bufftech vinyl fence installation guide (post hole size/depth, concrete-fill requirement, repeated across the guide’s panel styles; no post-centers table is published for this style specifically). Not to scale
ScaleNot to scale
An illustrative example, not a spec — actual panel and lattice heights vary by design and by the height cap that applies to your lot.

Why vinyl skips the upkeep wood lattice needs

A wood lattice top needs the same staining and sealing schedule as the solid base below it to resist rot and UV graying (see our board & lattice wood fence page for that upkeep and the AWPA treatment categories involved). Rigid PVC doesn’t rot and has no wood grain to seal in the first place. One vinyl manufacturer’s published cleaning guidance for its fence line is simply: a non-abrasive cleaner "like a car wash soap," applied "with a soft cloth or brush" — that’s the entirety of what that source publishes, and this page doesn’t extend it into specific pressure-washer settings or named chemicals it doesn’t state.

White vinyl spaced-picket fence enclosing the yard of an elevated coastal beach house
A vinyl spaced-picket fence at an elevated Galveston beach house.
White vinyl spaced-picket fence beside an elevated coastal home
A vinyl picket fence beside an elevated coastal home.
White vinyl spaced-picket fence enclosing a yard beside elevated coastal homes built on pilings
A vinyl picket fence enclosing a yard near Galveston’s coastline.

Will a lattice-top vinyl design fit your spot?

Answer for your lot. This checks your plan against Galveston's published height rule — it isn't a permit determination.

What the ordinance says

City of Galveston Land Development Regulations, Division 2.500, Sec. 2.501 Fences and Walls (Height). The ordinance doesn't state how 60% transparency is measured across a mixed solid/lattice design or what percentage open any specific manufactured lattice panel is — confirm both with the City's Development Services Department and the panel's own product sheet before you build.

★★★★★
White PVC fence. Beautifully done! Thanks Mustang it's really looks perfect.
Diana Martinez · Google review · a year ago
★★★★★
I have hired Mustang fencing services to fix my backyard fencing. Good wood to used. I really like theirs work. Best of luck
Zaidbin Saif · Google review · a year ago
★★★★★
Excellent work. They came in handy after the hurricane hit our backyard. Friendly people too.
Donez · Google review · a year ago

Reviews shown word for word from the Mustang Fencing Services Google Business Profile (Galveston), captured 2026-10-26.

Questions we get about this

How tall can a lattice-top vinyl fence be in a Galveston front yard?
A solid fence in a front yard is capped at 4 feet. Above that, the whole fence needs to be at least 60% transparent to reach 5 feet (6 feet for single-family attached or multifamily) under LDR §2.501(B).
Does a lattice top count toward the 8-foot height cap elsewhere on my lot?
Yes — the 8-foot cap for anywhere else on a residential lot applies to the total fence height, solid or open. Transparency isn’t required there, but the lattice still adds to the overall height.
What counts as "60 percent transparent" for a mixed vinyl design?
The ordinance sets the threshold but doesn’t spell out the measurement method for a solid-base-plus-lattice design. Ask the City’s Development Services Department, and ask the fence manufacturer for the specific lattice panel’s own published open-area percentage.
Does a vinyl lattice top need to be stained or sealed like a wood one?
No. Rigid PVC (ASTM F964) doesn’t rot or weather the way wood does. One manufacturer’s published cleaning guidance is simply a non-abrasive cleaner and a soft cloth or brush — no staining or sealing schedule applies.
Is there a standard post spacing for this style?
Not published by name. The vinyl install guide we cite gives generic post hole size, depth and concrete-fill numbers repeated across its panel styles, but doesn’t name "lattice top" as one of its specific styles with its own spacing table — so this page states that gap rather than inventing a number.

Sources

Checked October 27, 2026. Rules change, so confirm with the City before you build.

  1. City of Galveston Land Development Regulations, Division 2.500, Sec. 2.501 Fences and Walls — Residential fence height caps: 8 ft general, 4 ft solid in a front yard (5 ft / 6 ft if ≥60% transparent), 12 ft tennis court.
  2. ASTM F964-13 (scope) — Rigid PVC exterior profiles for agricultural, commercial and residential fencing and railing; wind load/loadbearing not addressed.
  3. CertainTeed Bufftech vinyl fence installation guide — Post hole size and depth, concrete-fill requirement (stated as repeated across panel styles); no post-centers table published for a lattice-top style.
  4. Illusions Vinyl Fence, FAQ: "How do I clean my Illusions vinyl fence?" — Published cleaning guidance: a non-abrasive cleaner such as car wash soap, applied with a soft cloth or brush.
Free on-site estimate

Thinking about a lattice-top vinyl design?

A free on-site estimate can go over height limits for your specific lot and the panel-to-lattice split that works for your yard.

Page reviewed October 27, 2026 by Mustang Fencing Services, Galveston. Next review due April 2027.

PLAN YOUR FENCE OR GATE PROJECT WITH US TODAY

Planning a new fence, a driveway gate or an automated entry? Tell us about your property and we’ll set up a free on-site estimate. We work with homeowners, HOAs and businesses across Galveston Island and Galveston County.

Prefer to talk? Call (346) 910-8641.

WHAT OUR CLIENTS ARE SAYING

Mustang Fencing

WE PROUDLY SERVE GALVESTON ISLAND & GALVESTON COUNTY

Areas we serve:

Galveston TX

Galveston Island

Jamaica Beach TX

Tiki Island TX

Bayou Vista TX

La Marque TX

Texas City TX

Hitchcock TX

Santa Fe TX

Dickinson TX

Bacliff TX

San Leon TX

Kemah TX

League City TX

Clear Lake Shores TX

OUR PARTNERS

Galvanized chain link fence with a wide drive gate across a residential lot
Wood privacy fence with a double gate and black hardware